Science Products offers microelectrode holders for various headstages/amplifiers.
Part numbers/Ordering information
|wire/pellet -||with/without port||O.D. glass -||pin/jack||straight/angle||- handle|
|HE = pin/jack||
W = wire
|P = with port||
|M = 2 mm pin||45 = 45° angle||H|
|HB = BNC||
P = pellet
|O = without port||F = 2 mm jack||90 = 90° angle|
|HU = HLU||PP = additional port||without sign = straight|
|HL1 = HL-1||V = Vent|
|HL2 = HL-2(*)|
|(*) HL2 type holders discontinued - please use HE type holders with 2 mm pin.|
|Examples:||HEW - P1.5 - M90 =||E type electrode holder, Ag wire, with port, for 1.5 mm glass, 2 mm pin connector, 90° angle|
|HEP - O1.2 - F =||E type electrode holder, Ag-AgCl pellet, without port, for 1.2 mm glass, 2 mm jack connector, straight|
|HBW - P1.0 =||BNC type electrode holder, Ag wire, with port, for 1.0 mm glass|
The HE type holders are designed to fit (older) Dagan, A-M Systems, Warner, or WPI amplifiers and have a 2 mm pin or a 2 mm jack to connect the headstage.
These electrode holders are available with a replaceable Ag wire (must be chloridinated before use) or a 2 mm × 2 mm Ag-AgCl pellet. Pipette seals are also replaceable and adjustable. These holders are available without or with 2 mm suction port, straight, 90° or 45° (second suction port upon request). You can get 45° holders with handle.
The HB type holders fit headstages with BNC connector. They are straight and are equipped without or with 2 mm suction port. You can choose between a replaceable Ag wire (must be chloridinated before use) or a 2 mm × 2 mm Ag-AgCl pellet. Pipette seals are also replaceable and adjustable.
The HU type holders are made for Axon U headstages. The HL1 and HL2* types fit older Axon headstages.
All electrode holders are made of polycarbonate (HB types of Teflon upon request). The holders can fit glass with O.D. (mm): 1.0; 1.2; 1.5, or 2.0 (x.x please specify when ordering).