HEP-P1.0-M90
Science Products offers microelectrode holders for various headstages/amplifiers.
Part numbers/Ordering information
|
type |
wire/pellet - | with/without port | O.D. glass - | pin/jack | straight/angle | - handle |
| HE = pin/jack |
W = wire |
P = with port |
x.x (mm) |
M = 2 mm pin | 45 = 45° angle | H |
| HB = BNC |
P = pellet |
O = without port | F = 2 mm jack | 90 = 90° angle | ||
| HU = HLU | PP = additional port | without sign = straight | ||||
| HL1 = HL-1 | V = Vent | |||||
| HL2 = HL-2(*) | ||||||
| (*) HL2 type holders discontinued - please use HE type holders with 2 mm pin. | ||||||
| Examples: | HEW - P1.5 - M90 = | E type electrode holder, Ag wire, with port, for 1.5 mm glass, 2 mm pin connector, 90° angle |
| HEP - O1.2 - F = | E type electrode holder, Ag-AgCl pellet, without port, for 1.2 mm glass, 2 mm jack connector, straight | |
| HBW - P1.0 = | BNC type electrode holder, Ag wire, with port, for 1.0 mm glass |
The HE type holders are designed to fit older Dagan, Warner, or WPI amplifiers and have a 2 mm pin or a 2 mm jack to connect the headstage.
These electrode holders are available with a replaceable Ag wire (must be chloridinated before use) or a 2 mm × 2 mm Ag-AgCl pellet. Pipette seals are also replaceable and adjustable. These holders are available without or with 2 mm suction port, straight, 90° or 45° (second suction port upon request). You can get 45° holders with handle.
The HB type holders fit headstages with BNC connector. They are straight and are equipped without or with 2 mm suction port. You can choose between a replaceable Ag wire (must be chloridinated before use) or a 2 mm × 2 mm Ag-AgCl pellet. Pipette seals are also replaceable and adjustable.
The HU type holders are made for Axon U headstages. The HL1 and HL2* types fit older Axon headstages.
All electrode holders are made of polycarbonate (HB types of Teflon upon request). The holders can fit glass with O.D. (mm): 1.0; 1.2; 1.5, or 2.0 (x.x please specify when ordering).