MM-94B

Dreiachsige motoriserte Manipulatormechnik für rechts- oder linksseitigen Anbau (Narishige)
Beschreibung

The MM-94 motor-driven coarse micromanipulator enables remote controlled movement of a pipette into a microscope observation field. The bigger the microscope, the more difficult manual control becomes; remote control is the mainstream alternative. Control is easy, with the joystick right at the operator's hand, and a return mechanism facilitates pipette exchange.

The MM-94B is an add-on type manipulator for left-side use of MM-94, that is used with a control unit of MM-94. For the full setup with right and left-side, MM-94 and MM-94B share one control unit.  Since MM-94B does not include control unit, MM-94 is required to use MM-94B.  For left-side use without control unit, please contact us.

Accessories
    Hex Wrench

Movement range
    X 22 mm, Y 22 mm, Z 22 mm

Driving Speed
    X/Y axis     1.4 mm/s (with use of high-speed button)
Maximum speed 0.7 mm/s (with use of speed adjusting knob)
Minimum speed 0.1 mm/s (with use of speed adjusting knob)
    Z axis     2.8 mm/s (with use of high-speed button)
Maximum speed 1.4 mm/s (with use of speed adjusting knob)
Minimum speed 0.2 mm/s (with use of speed adjusting knob)

Working voltage     Refer to control unit of the MM-92
Power consumption     Refer to control unit of the MM-92

Dimensions/Weight
    Controller     W 70 × D 100 × H 120 mm, 530 g
          Connecting cable (1.2 m)
    Drive unit    W 85 × D 112 × H 144 mm, 591 g
          Connecting cable (1.2 m)