VC-6, VC-6M

6-Kanal Ventilsteuerung (Warner)
Beschreibung

These perfusion valve control systems are uncomplicated, easy to operate, and designed to control up to six separate valves.

  • Manual or computer control
  • Basic or complete systems available
  • Pinch valves, standard
  • PTFE valves, optional
  • Mini valve, optional

The VC-6 Valve Controller is configured to control up to 6 valves. Each valve is individually controlled by a manual switch or an external digital (TTL) signal. An event marker pulse, generated each time a valve is switched on, is provided for tape or chart recordings.

 

VC-6 Standard Pinch Valve

These standard systems valves are supplied with pinch valves as shown in the picture below. They are the simplest to maintain as the solution never comes in contact with the valve and tubings are easily changed. Valves are dual acting (3-way) with both normally open and closed sides. A Y connector at the valve input permits solution flow to waste with the valve off.

 

VC-6 PTFE Valve Systems

The PTFE valves, as shown in the picture below, are also available and are for applications where resistance to chemicals is a concern.

These valves are 2-way (Either ON or OFF).

 

VC-6M Mini-Valve Systems

The VC-6M is designed for slow flow perfusion systems where smaller diameter tubing is used. These mini-valves, as shown in the ride hand side picture, mount directly to a compact PTFE manifold. The 3-way valves allow for solutions to flow to waste if desired. The VC-6M system is ideally suited for use with the SF-77C perfusion stepper systems.

 

System Choices, Basic or Complete

The VC-6 Valve Perfusion Control System is available in two configurations with a choice of either a standard pinch valve or PTFE Valve. The Basic Systems include the VC-6 Controller, Valves, Valve Bracket with 8 ft long Cable and MP Series Manifold. The systems with the standard pinch valve are also supplied with C-Flex" Valve Tubing.

The Complete VC-6 Systems includes all of the components in the Basic Systems plus six 60cc Reservoirs, Reservoir Holder, Ring Stand, Stopcocks and Tubing Connectors. In addition to that, the systems with a standard pinch valve are supplied with Tygon Tubing (0.8 mm ID; 15 m length). The systems with a PTFE valve include PTFE tubing (1.6 mm ID; 7.6 m length).

The VC-6M Mini-Valve Perfusion Control System is also available in two configurations. The Basic Systems include the VC-6Controller, Valves, Valve Manifold, 8 ft Cable and ML Series Manifold. The Complete Systems include all of the components in the Basic Systems plus eight 10cc Reservoirs, Reservoir Holder, Ring Stand, Stopcocks, Tubing Connectors and two packages of PE-50 Tubing (15 m long).

 

Specifications

 

Valves
VC-6 Standard 12 V 3-way pinch valves
VC-6 PTFE 12 V 2-way PTFE
VC-6M Mini 12 V 3-way solenoid valves
VC-6 Valve Controller
Switching Manual or TTL logic
Event Marker Logic level pulse
Power 110-130 or 200-250 VAC, 50/60 Hz, 50 VA
Size 8.9 × 20 × 25 cm (H × W × D)
Warranty All systems carry 2-year warranty

 

 

Reservoir Height Approx. Flow Rate Pinch
or PTFE Valve
Approx. Flow Rate
Mini-Valve
61 cm (24 in) 14 ml/min 1.2 ml/min
30 cm (12 in) 9 ml/min 0.8 ml/min
20 cm (8 in) 5 ml/min 0.6 ml/min

 

 

 


 

Valve Control System Options

Valve Control Systems
VC-66CS Perfusion valve control system, complete, with pinch valves, 6 channel
VC-66CST Perfusion valve control system, complete, with PTFE valves, 6 channel
VC-66MCS Perfusion valve control system, complete, with mini valves, 6 channel
VC-66MLTS Perfusion valve control system, complete, with large tube mini valves 6 channel
VC-64CS Perfusion valve control system, complete, with pinch valves, 4 channel
VC-66BB Perfusion valve control system, basic, with pinch valves, 6 channel
VC-66BBT Perfusion valve control system, basic, with PTFE valves, 6 channel
VC-66MBB Perfusion valve control system, basic, with mini valves, 6 channel
Perfusion Accessories
FR-50 Flow regulating valve
FR-55S Flow regulating valve, with on/off switch
DWV Dedicated Workstation Vacuum
Fittings and Tubing
CFL-6 C-Flex tubing, ID 0.8 mm; length 1.8 m, for pinch valves
CFL-25 C-Flex tubing, ID 1.6 mm; OD 3.2 mm; length 7.6 m
TY-50 Tygon tubing, ID 1.6 mm; OD 3.2 mm; length 15 m
PE-50/10 Polyethylene tubing, PE-50, 3 m
PE-50/100 Polyethylene tubing, PE-50, 30 m
TT-25 PTFE tubing, ID 1.6 mm; 7.6 m
TC-3 Tubing connectors, 24 pack
SL-6 Luer stopcock, 6 pack
Replacement Valves
PV-1 Replacement pinch valve
TV-2 Replacement PTFE valve
SV-1 Replacement mini valve
Replacement Parts
RS-1 Support stand
SL-6 Luer stopcock, 6 pack
MP-6 MP Series perfusion mini manifold, 6 to 1 ports
PV-1 Replacement pinch valve
TV-2 Replacement PTFE valve
SV-1 Replacement mini valve
SH-8/10 Syringe holder with eight 10 cc syringes
SH-6/60 6 reservoir syringe holder with 60 cc syringes
SH-6/140 Syringe holder with six 140 cc syringes