MM-94

Three-axes Motor-driven Coarse Manipulator (Narishige)
Description

Coarse manipulator with most popular motor-drive system.

This motor-drive coarse manipulator is used for initial positioning of the pipette within the microscope field of view. It is controlled remotely using the joystick. Z-axis moves at double the speed of X/Y-axis, so that time for sample change will reduce. MM-94 is the set of dedicated drive unit for right-side, controller, and control unit. 

The MM-94 is a right-sided model. For the full setup with right and left-side, refer to MM-94B. Both manipulators mechanicals may share one control unit.
For setup flexibility the MM-94 can be placed upright with the use of the control box stand (PS-1).

Accessories
    Power Cord, Hex Wrench

Movement range
    X 22 mm, Y 22 mm, Z 22 mm

Driving Speed
    X/Y axis     1.4 mm/s (with use of high-speed button)
Maximum speed 0.7 mm/s (with use of speed adjusting knob)
Minimum speed 0.1 mm/s (with use of speed adjusting knob)
    Z axis     2.8 mm/s (with use of high-speed button)
Maximum speed 1.4 mm/s (with use of speed adjusting knob)
Minimum speed 0.2 mm/s (with use of speed adjusting knob)

Dimensions/Weight
    Control unit    W 204 × D 135 × H 62 mm, 1.05 kg
    Controller    W 70 × D 100 × H 120 mm / 530 g
          Connecting cable (1.2 m)
    Drive unit    W 80 × D 160 × H 104 mm, 591 g
          Connecting cable (1.2 m)

Power source
    AC 100 V ~ AC 240 V, 50/60 Hz
    Approx. 10 W