Ideal for DNA injection with Electric Microinjector
Setting the time and pressure in advance makes it possible to inject very small volumes of liquid with great precision. Intuitive operation via touch panel, memory function can store the setting value. The easy-to-insert fitting mechanism is incorporated in the tubing connection, making more easier installation.
A compressor or cylinder (air, nitrogen, etc.) with regulator are required to use this device.
Using with IM-400B (sold separately), suction and filling the solution from pipette tip are available.
Connecting cable for operation unit (2.9 m)
Injection holder (HI-9)
Injection tube (CT-4, ø 2 mm × 1.2 m)
Gas input hose (ø 6 mm × 2 m, ø 6 mm × 1 m)
T-joint with a pressure relief valve
Foot switch (connecting cable 2.9 m)
Power cord (1.5 m)
Silicone rubber gasket (HI01PK01)
Gas input port for ø 6 mm diameter hose
Gas output port for ø 2 mm diameter tube
Supply pressure 0.4 ~ 0.7 MPa
Injection/Balance gas pressure 0 ~ 0.5 MPa
Flushing gas pressure 0.4 ~ 0.7 MPa
Power supply / consumption AC 100 V ~ AC 240 V, 50/60Hz / 15 W
Control box W 120 × D 211 × H 264 mm, 3.1 kg
Operation unit W 130 × D 153 × H 61.5 mm, 780 g