The optimal manipulator specifically made for handling suspension cells!

Once having been set, the innovative fan-shaped driver never fails to return to where the pipette tip is supposed to be. The newly installed knob allows a pipette to move along its axis by using traditional and smooth oil hydraulic joystick. This manipulator will spare the laborious work of a pipette alignment with the optical axis, providing more time for objective operation.

This product is sold in the set of both handed manipulators and a dedicated adaptor.

Easy attachment of a pipette

The injection holder is provided with an anchor (special clasp) that fits in the driver body, which enables a distance from a pipette tip to the anchor to be in a length. This function can be used for memorizing a regular position so that time for a pipette exchange will reduce and repeated pipette location is precise and stable.

Pipette angle adjustment centered at the tip to stay in view

The pipette tip is designed for staying at the optical axis against any angles. So angle adjustment is hard to miss the tip in the field of view.

Simple and reliable motion from Home to Working position

50 mm retracting margin enables easy exchange of a pipette. Breakage of pipettes is greatly reduced during the replacement.

Microscope compatibility table

A dedicated adaptor for each microscope has been developed. It needs no adjustment for mounting so that it can be installed at best position without fail. Find an appropriate adaptor in the following table.

In the event a special adaptor is required except for the above table, depending on the specifications of a stage, a plate insert, or thermos-plate, please contact Narishige for more information.

Specifications

Accessories (included)
    Dedicated Mounting Adaptor, IP Iron Plate × 2 units, Positioning Gauge, Anchor × 2 units, Hex Wrench

further Accessories
    MTK-AC   Anchor for TAKANOME

Movement range

X/Y/Z-axis
    Oil hydraulic control     10 mm
    Full rotation of knob    250 µm
    Minimum graduation     5 µm

T-axis (for holder))
    Oil hydraulic control 10 mm
    Full rotation of knob 1,000 µm
    Minimum graduation 20 µm

Manual (Return and Home position)
    50 mm

Incident angle
    15° to 40° Fine

Dimensions / Weight

Control unit
    W 85.6 × D 225 ~ 235 × H 151 to 171 mm,
    Approx. 1.9 kg

Drive unit
    W 108 to 138 × D 145 to 155 × H 100 to 150 mm,
    Approx. 820 g

Hydraulic tube length
    0.6 m

Complies with Class.1 MDD 93/42/EEC.

Associated Information