Back to: HEW-Ox.x-M

HEW-O1.0-M

PrintShare
E-type electrode holder, Ag wire, without port, for 1.0 mm glass, with 2 mm pin connector, straight
Electrode holder HEW-Ox.x-M
Description

 

Science Products offers microelectrode holders for various headstages/amplifiers.

Part numbers/Ordering information

type

wire/pellet - with/without port O.D. glass - pin/jack straight/angle - handle
HE = pin/jack

W = wire

P = with port

x.x (mm)

M = 2 mm pin 45 = 45° angle H
HB = BNC

P = pellet

O = without port   F = 2 mm jack 90 = 90° angle  
HU = HLU   PP = additional port     without sign = straight
HL1 = HL-1   V = Vent        
HL2 = HL-2(*)            
(*) HL2 type holders discontinued - please use HE type holders with 2 mm pin.

 

Examples: HEW - P1.5 - M90 = E type electrode holder, Ag wire, with port, for 1.5 mm glass, 2 mm pin connector, 90° angle
  HEP - O1.2 - F = E type electrode holder, Ag-AgCl pellet, without port, for 1.2 mm glass, 2 mm jack connector, straight
  HBW - P1.0 = BNC type electrode holder, Ag wire, with port, for 1.0 mm glass

The HE type holders are designed to fit older Dagan, Warner, or WPI amplifiers and have a 2 mm pin or a 2 mm jack to connect the headstage.
These electrode holders are available with a replaceable Ag wire (must be chloridinated before use) or a 2 mm × 2 mm Ag-AgCl pellet. Pipette seals are also replaceable and adjustable. These holders are available without or with 2 mm suction port, straight, 90° or 45° (second suction port upon request). You can get 45° holders with handle.

The HB type holders fit headstages with BNC connector. They are straight and are equipped without or with 2 mm suction port. You can choose between a replaceable Ag wire (must be chloridinated before use) or a 2 mm × 2 mm Ag-AgCl pellet. Pipette seals are also replaceable and adjustable.

The HU type holders are made for Axon U headstages. The HL1 and HL2* types fit older Axon headstages.

All electrode holders are made of polycarbonate (HB types of Teflon upon request). The holders can fit glass with O.D. (mm): 1.0; 1.2; 1.5, or 2.0 (x.x please specify when ordering).